Using The Moulds - TEFAL Cake Factory Manual

Using the Moulds

To ensure the proper operation of your appliance, when filling the moulds, do not exceed the
proportions indicated.
Silicone PROflex Mould
The Cake Factory is only compatible with moulds belonging to the Tefal PROflex range,
dimensions 30 x 21 cm.
Pour into the mould Remove the
aluminium bowl
* To cook canelés or for any use of a mould taller than 4.5 cm, directly place the PROflex mould in the Cake
Factory without the support grid.
Non-stick aluminium bowl
Grease the bowl Fill the bowl
Melting chocolate
Place the chocolate Remove the grid
in the aluminium
mould
To melt chocolate, use the Cake Factory non-stick aluminium mould or a ceramic, silicone or
stainless steel mould of maximum dimensions: 19 cm long, 19 cm wide, 6 cm high, which is
suitable for baking at temperatures up to 250°C.
Ensure that the Place the grid on
black reflector is the reflector*
properly in place
and attached to
the bottom of the
appliance
Remove the grid Ensure that the
black reflector is
properly in place
and attached to
the bottom of the
appliance
Close Put chocolate in a
suitable container
Place the mould Close
Insert the bowl Close
Place the grid on Close
the reflector
29