Oki C5100 Maintenance Manual page 68

www.eManualpro.com
Display on Operator Panel
OPEN TOP COVER
nnn:PAPER JAM
OPEN DUPLEX COVER
nnn:PAPER JAM
INSTALL DUPLEX UNIT
nnn:DUPLEX UNIT OPEN
REPLACE IMAGE DRUM
nnn:* DRUM LIFE
REPLACE FUSER
nnn:FUSER LIFE
REPLACE BELT
nnn:BELT LIFE
REPLACE BELT
nnn:BELT LIFE
CHECK IMAGE DRUM
nnn:* DRUM MISSING
CHECK IMAGE DRUM & BELT LOCK
nnn:K DRUM MISSING
CHECK BELT
nnn:BELT MISSING
CHECK FUSER
nnn:FUSER MISSING
42049001TH Rev.1
Table 5-1-1 Operator Alarm (3/5)
Ready
Attention
LED LED
No Blinks Indicates a paper jam occurred in the paper path.
light Transport
Exit
Duplex Entry
No Blinks Indicates a paper jam occurred at about the duplex unit.
light Duplex Reversal
Duplex Input
No Blinks Displayed while the duplex unit is removed with paper jammed in
light the duplex unit. When the duplex unit is removed while paper is
not jammed in the duplex unit, the service call error 181 occurs.
No Blinks Indicates the image drum is at the end of its life. A cover
light opening and closing operation places the printer in the state
of warning of the life end and, after 500 pages (images) are
impressed, an image drum life error occurs again.
Y
M
C
K
No Blinks Indicates the fuser is at the end of its life. A cover opening
light and closing operation places the printer in the state of
warning of the life end and, after 500 pages (prints) are
printed, a fuser life error occurs again.
No Blinks Indicates the belt is at the end of its life. A cover opening
light and closing operation places the printer in the state of
warning of the life end and, after 500 pages (prints) are
printed, a belt life error occurs again.
No Blinks ndicates the printer is full of waste toner. Only first-time
light cover opening and closing operation places the printer in the
state of warning of such an event and, after 500 pages
(images) are impressed, a waste toner full error occurs
again.
No Blinks Indicates the image drum (Y, M or C) is not properly installed.
light Y
M
C
No Blinks Indicates the belt is not locked or the black drum is not
light properly installed.
No Blinks Indicates the belt unit is not properly installed.
light
No Blinks Indicates the fuser unit is not properly installed.
light
Oki Data CONFIDENTIAL
Description
Code
nnn
381
382
383
370
371
360
350
351
352
353
354
355
356
340
341
342
343
330
320
69 /