Oki C5100 Maintenance Manual page 67

www.eManualpro.com
Display on Operator Panel
REPLACE TONER
nnn:* WASTE TONER FULL
HAVE YOU REPLACED * TONER?
YÅÅENTER/N=CANCEL
REPLACE TONER
nnn:* TONER EMPTY
CHECK TONER CARTRIDGE
nnn:* TONER SENSOR ERROR
OPEN FRONT COVER
nnn:PAPER SIZE ERROR
CHECK MP TRAY
nnn:PAPER JAM
OPEN FRONT COVER
nnn:PAPER JAM
42049001TH Rev.1
Table 5-1-1 Operator Alarm (2/5)
Ready
Attention
LED LED
No Blinks Indicates waste toner of the color marked with an asterisk (*)
light is full.
Y
M
C
(No indicated the Black toner)
Opening and closing the cover places the printer in the state
of warning of such an event, enabling about 50 pages to be
impressed.
No Blinks When the top cover is opened with the printer being full of
light waste toner of the color marked with an asterisk (*), and
then closed, this message is displayed.
Y
M
C
(No indicated the Black toner)
When the toner of the color marked with an asterisk (*) has
been replaced, press the "ENTER". When it has not been
replaced, press the "CANCEL" switch.
No Blinks Indicates toner of the color marked with an asterisk (*) is out.
light Y
M
C
K
Opening and closing the cover places the printer in the state
of warning of such an event, enabling about 50 A4 pages (50
images) to be impressed (such number of pages will be
determined later).
No Blinks Notifies that something wrong with the toner sensor. When
light the engine is set to Factory mode, service call error display
described later is provided.
Y
M
C
K
No Blinks Notifies that paper of an inappropriate size was fed from the
light tray. Paper in the tray or whether multiple sheets were fed
must be checked. By opening and closing the cover, the
printer performs recovery printing and continues operating.
No Blinks Indicates a paper jam occurred.
light MP TRAY (MP TRAY)
No Blinks Indicates a paper jam occurred.
light TRAY1 (TRAY 1)
TRAY2 (TRAY 2)
FEED
DUPLEX
Oki Data CONFIDENTIAL
Description
Code
nnn
414
415
416
410
411
412
413
540
541
542
543
400
390
391
392
380
372
68 /