Oki C5100 Maintenance Manual page 57

www.eManualpro.com
tttttt EMPTY
DISK FILE SYSTEM FULL
WRITE PROTECTED DISK
COLLATE ERROR
INVALID ID. JOB REJECTED
LOG BUFFER FULL. JOB REJECTED
DISK OPERATION ERROR
LOAD mmm IN MP TRAY
AND PRESS ONLINE SW
42049001TH Rev.1
Displayed Message Description
Indicates the tray 1 or 2 became empty of paper or is removed, and
warns of it until printing is instructed; or
Displayed when no paper was found in the multipurpose tray after
one attempt to feed paper from it, and disappears by opening and
closing the cover, or by turning the printer on again, upon termination
of any job being printed.
MP TRAY (Multipurpose Tray)
TRAY1 (Tray 1)
TRAY2 (Tray 2)
Indicates a disk full condition occurred. A temporary warning, which
is showing until job termination and then disappears. (For C5300)
Indicates an attempt to write data into a protected file was made. A
temporary warning, which is showing until job termination and then
disappears. (For C5300)
Indicates memory is full with MOPY data.
Means printing was canceled as unauthorized (for job account
management) at reception of any of the following. Cleared by
pressing the ONLINE key.
1. A job from a user unauthorized to perform printing.
2. A job from a user unauthorized to perform color printing.
Indicates that, as log memory space internal of the printer was
exhausted and the operation specified in such a log full condition is
to "cancel job", a job has been canceled (in connection with
JobAccount). Cleared by pressing the ON-LINE switch.
Indicates a disk error other than the Nos. 29 and 30 occurred.
Processing operation which does not use the disk can be performed.
(For C5300)
Indicates an error occurred during PU firmware reprogramming
(does not occur in user environments). (Character strings displayed
are output by PU firmware.)
Indicates manual printing is requested, and prompts the operator for
the manual insertion of the paper mmm.
Oki Data CONFIDENTIAL
58 /