Functions - Paitec ES8500 User Manual

User Manual

Functions

1
Batch Count
You can set the Batch Count of jobs to be done. For example, if you set the count on
100, machine will stop operating when the job reaches 100. Press Start/Stop button
again, machine will start to finish another 100.
① Press Batch Count button and the LED will light on
② Select job volume by using ◀▶ button.
* Press the button on by one, count will change by 1 and if you press for more than one
second, the count will change by 10/second.
* Press Batch Count button, the count will change 50~100.
③ Press Set button and check the number displayed on the panel.
* You can set the counter up to 500 sheets.
2
Auto Start
Auto Start function is to separate the job as volume setting with time interval between
Jobs. The machine will automatically rework after the set number of work.
① Set the Batch Count first. Auto Start is only available when Batch Count is activated.
② After pressing Auto Start, "Time Interval" will be shown on the OP. Set the interval time
with ◀▶ buttons.
③ Press Set to save the value. (Max 99 seconds)
④ After the job is done as Batch Count setting, taking Time Interval as setting & rework
automatically.
⑤ If you turn off and on the machine, you have to set the function again.
ES8500
21
Operation
Ver. 01