Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips FWC139/98 User Manual

IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press STANDBY-ON y.
➜ The system will switch to the last selected
source.
To switch the system to standby mode
● Press STANDBY-ON y.
➜ The volume level (up to a maximum volume
level of 31), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.

Power-saving automatic standby

The power-saving feature automatically switches
to standby 30 minutes after a tape or CD
playback has ended and no control is operated.

Adjusting volume and sound

Press VOLUME 34 to increase or decrease
1
volume.
➜ Display shows the volume level UoL and a
number from 0-31.

Basic Functions

2
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB if
the DBB is activated.
3
Press DSC repeatedy to
repeatedly to select the
desired sound
effect:CLASSIC,JAZZ, POP
or ROCK.
4
Press MUTE on the
remote control to stop
sound play-back instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls.
11