CD Operation
IMPORTANT:
The lens of the CD player should never be
touched.
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Adjust the source selector to select CD source.
2
Press OPEN/CLOSE on the system to open
the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN/CLOSE to close the
CD door.
➜ rEAd is displayed as the CD player scans
the contents of a disc. The total number of
tracks and the total playing time are also shown.
Press 2; to start playback.
4
➜ Current track number followed by elapsed
playing time of the track are displayed during disc
playback.
12
To pause playback press 2;. Press 2; again to
5
resume play.
➜ Display: The current track number and
elapased time flash when playback is paused.
To stop disc playback, press STOP 9.
6
Note: CD playback will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER.
– you select standby.
Selecting a different track
● Press SEARCH ¡1 or 2™ (í/ë on the
remote) once or repeatedly until the desired
track number appears in the display.
● Press 2; to start playback.
Finding a passage within a track
Press and hold down SEARCH ¡1/2™ or
1
press à/á on the remote.
➜ The disc is played at high speed and low
volume.
2
When you find the passage you want, release
¡1 or 2™ or press à/á on the remote.
➜ Normal playback continues.