Advertisement
•
Operate the product only as instructed in this manual.
•
Before turning on the power for the first time, make sure the soundbar is plugged to
power outlet.
•
For safety reasons, do not remove any covers or attempt to gain access to the
inside of the product. Refer any servicing to qualified personnel.
•
Do not attempt to remove any screws or open the casing of the unit; there are no
user serviceable parts inside. Refer all servicing to qualified service personnel.
Powering On/Off
1.
Plug the soundbar into a wall outlet, it will automatically enter standby mode.
2.
Short-press the multi-function button to turn on the soundbar.
3.
To turn off, press the STANDBY button on remote control or unplug from wall outlet.
Setting the Soundbar
1.
Switch on the soundbar by using power button on soundbar or by using STANDBY
button on remote. After switching on, the default input mode will appear on
display.
2.
Input mode can be changed by pressing the power button again or by using the
INPUT button on remote.
3.
Below are input mode names appearing in the soundbar display:
Bluetooth pairing mode
AUX mode
Optical mode
HDMI mode
USB mode
Advertisement
