Advertisement
AUX mode
•
Connect the soundbar to your PC, tablet, smart phone, TV or other device using
3.5mm audio cable, and short-press the multi-function button to switch to AUX
input mode.
•
In this mode, playback can only be controlled on your connected device.
Note:
For some computers, you may need to access the audio control panel to manually set
the sound bar as shown in the below picture.
Playing Audio via USB Port
The soundbar automatically switches to USB input mode with the LED display (US) when a
USB flash drive is inserted (this mode isn't selectable on the soundbar or remote control
unless a USB flash drive is connected).
1.
Ensure that your USB flash drive contains MP3 or WMA audio files (other file types
are not supported).
2.
Connect the USB flash drive to the USB port on the soundbar (or your own USB
extension cable connected to the USB port); music will automatically play.
3.
The remote control includes USB input mode playback controls.
Optical Mode
Use this operating mode to play music from the optical digital input for example from a TV
on your soundbar (A).
The TV must have an optical digital output. Use the optical cable supplied to make the
connection.
Proceed as follows:
•
Connect the optical cable to the optical digital output of your TV.
•
Connect the optical cable to the optical digital input of your soundbar.
•
Switch the TV set and soundbar on. Set the connected TV to "PCM Stereo" or
"Stereo 2.0".
Advertisement
