Adjust The Vertical Location; Adjust The Focus And Keystone - RCA RPJ133_24DISP Instruction Manual

Follow below picture to adjust the vertical location.
SCREEN
PROJECTOR
VERTICAL
DIMENSION
Adjust this knob ( ANGLE ADJ. knob)
to ne- tune the display angle to higher.

Adjust The Focus And Keystone

Follow below picture to adjust the focus and trapezoidal screen.
Adjust the focus by turning the knob while
observing the image pixels near the center of the
screen. Optimal focus is obtained when the
pixels are clearly visible. Depending on the
projected screen size, the focus near the screen
edges may be less sharp than the screen center.
Keystone image is created when the projector
beam is projected to the screen in an angle.
Keystone correction will restore the distorted
image to a rectangular or square shape.
SCREEN
VERTICAL
DIMENSION
SCREEN
VERTICAL
DIMENSION
FOCUS ADJ. KNOB
Then sharpen the image
by rotating focus knob.
TRAPEZOIDAL ADJ. KNOB
7
PROJECTOR
PROJECTOR