Power; Speakers Connection; Optional Connection; Connecting A Usb Device Or Memory Card - Philips FWM593/55 User Manual

FM Antenna
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
C

Speakers Connection

Front Speakers
●
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "R" and left speaker to
"L", white wires to "+" and black wires to "-"
of the woofer connection terminals, blue wires
to "+" and black wires to "-" of the tweeter
connection terminals.
●
Connect the subwoofer wires to the
SUBWOOFER terminals, red wire to "+" and
black wire to "-".
1
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of + / - speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

Optional connection

The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the device's stored music through the
powerful speakers of Hi-Fi system.
●
Insert the USB device's USB plug into the
socket on the set.
OR
for the devices with USB cables:
1
Insert one plug of the USB cable (not supplied)
to the
2
Insert the other plug of the USB cable to the
USB output terminal of the USB device.
OR
for the memory card:
1
Insert the memory card into a card reader (not
supplied).
2
Use a USB cable (not supplied) to connect the
card reader into the
Connecting a non-USB device
Using AUX IN (white/red jacks)
●
Use the audio cables (white/red, not supplied) to
connect AUX IN (L/R) jacks of the main unit
2
(located on the back panel ) to the
corresponding AUDIO OUT jacks on an
external device (such as TV or VCR).
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX left terminal. Alternatively, you can use a
"single to double" cinch cable (the output sound
still remain mono).
Using MP3 LINK (3.5 mm jack )
●
Use a MP3 link cable (supplied) to connect
MP3 LINK jack of the main unit (3.5 mm,
located on the front panel) to an AUDIO OUT
or headphone jack on an external equipment
(such as CD player, or VCR).
Preparations
socket on the set.
socket on the set.
9