Preparations; Rear Connections; Power; Antenna Connection - Philips FWM593/55 User Manual

Preparations

FM antenna
AC power cord

Rear connections

The type plate is located at the rear of the
system.
A

Power

Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
8
Speaker
(right)
A
AM antenna
B
C
Subwoofer
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
B
Antennas Connection
Connect the supplied AM loop antenna to the
AM ANTENNA terminal. Adjust the position of
the antenna for optimal reception.
AM Antenna
1
AM
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
Speaker
(left)
2
Fix the claw
to the slot
3