Selecting The Ringing Tone; Service Functions; Audible Call Timer; Setting The Timer - Blaupunkt ANTARES AntaresT60 Operating And Installation Instructions

Selecting the ringing tone

You can select from among six different ring-
ing tones:
Up and down,
Oktave,
Trill,
2x Oktave,
2x Trill,
Triad and
Off.
In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor will mark Setup .
Press OK.
to select Ring. tones .
Press
Press OK.
The RING. TONES menu will appear in the
display.
to select Ringing tone .
Press
Press OK.
The ringing tone currently selected will be
played repeatedly.
Press / to select the desired ringing
tone.
Press OK.
You will return to the RING. TONES menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
TELEPHONE SETTINGS

Service functions

Audible call timer

With the audible call timer you can have a
signal sound at selected intervals during a
phone call. This function allows you to keep
track of the telephone costs.
The time interval for the audible call timer func-
tion can be set from 15 to 300 seconds.
In the telephone mode, press OK.
The DSC menu will appear in the display. The
cursor will mark Setup .
Press OK.
to select Audib. timer .
Press
Press OK.
The AUDIBLE CALL TIMER menu will ap-
pear. The number of seconds selected is in-
dicated after TIMER .
Press to select the desired setting
Off or TIMER .
Press OK.
If you select Off , you will return to the Setup
menu.
If you select TIMER , you can set the time in-
terval for the signal sound.

Setting the timer

Use the 0 - 9 keypad to enter the de-
sired interval. Use CLR to correct your
entry if necessary.
Press OK.
You will return to the Setup menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.
25