Advertisement
3
Mount the antenna (continued).
C. Secure the antenna to the mast.
Clamp
4
Connect to your TV.
6
Antenna
bracket, back
Antenna
mounting bolts
Mast
Rain
Antenna
boot
lead
Coax
cable
Place the mounting bolts
attached to the back of the
antenna bracket on either side
of the mounting mast.
Place the clamp over the
ends of the mounting bolts as
shown here.
Screw the wing nuts onto the
ends of the mounting bolts.
Tighten them so the clamp
holds the antenna on the
mast securely.
Connect one end of the included
coaxial cable to the antenna lead (if
you need a longer length of cable,
you can use your own RG6 coaxial
cable).
Once you've tightened the cable
onto the lead, lower the rain boot
over the connection to protect it
from water.
Connect the other end of the
coaxial cable to the ANT jack on the
supplied amplifier insert.
Pieces Used:
(1) Clamp
(2) Wing
nuts
Pieces Used:
(1) 16ft coaxial
cable
(1) Amplifier
insert
Advertisement
