Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips FWM143/37B User Manual

Setting the clock

1
In any mode, press CLOCK/TIMER twice.
➜ The clock digits for the hours flash.
Press TITILE-/+ ¡1 / 2™ (í/ë on the
2
remote) to set the hours.
3
Press CLOCK/TIMER again.
➜ The clock digits for the minutes flash.
Press TITILE-/+ ¡1 / 2™ (í/ë on the
4
remote)to set the minutes.
5
Press CLOCK/TIMER to confirm the time.
Note:
– If the clock has not been set, 0:00 will be
displayed.

Setting the timer

● The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
● If no button is pressed within 7 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In active mode, press and hold CLOCK/
TIMER for more than 2 seconds.
Press TITILE-/+ ¡1 / 2™ (í/ë on the
2
remote) to set the hours.
3
Press CLOCK/TIMER again.
➜ The clock digits for the minutes flash.
Press TITILE-/+ ¡1 / 2™ (í/ë on the
4
remote)to set the minutes.
5
Press CLOCK/TIMER to confirm the time
➜ The timer is now set and actiated.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER ON/OFF once.
➜ Display shows
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time
● Press SLEEP on the remote
control repeatly to select desired
time before system shuts off.
➜ Display shows SLEEP and
series of time options for
selection:120, 90, 60, 45,30,
15, OFF.
● To deactivate, press SLEEP on the remote
control once or more until 'OFF' is shown, or
press STANDBY-ON y (POWER y on the
remote).

Clock/Timer

if activated, and disappears if
19