Current Single TrueLumen PRO Installation Manual

IMPORTANT WARNINGS | SAVE THESE INSTRUCTIONS
This is NOT a page of legalese. It contains important safety information that you should read and save for future
reference. Remember you can always quickly reference instructions for all Current products on our website.
• Never attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
• Never plug in a wet cord. If a plugged in unit or socket does get wet, DON'T touch it. Instead, promptly disconnect the fuse or circuit breaker that
• Close supervision is necessary when any appliance is used by or near children.
an unsafe condition and will void your warranty.
• Do not operate at temperatures above 50º Celsius or 122º Fahrenheit.
may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
• Do not look directly into the LEDs.
We have included two installation instruction methods for installing the LED's over your aquarium.
#1 Canopy Option - using included swivel brackets for mounting to an aquarium canopy
#2 Tank Mount Option - using the optional aluminum docking mounts for setting the light directly on the tank.
Canopy Option:
1. Unpack your LED kit and remove the two swivel canopy brackets with screws.
2. Attach the swivel brackets to each end of the light fixture using the screws provided and a screwdriver.
3. Determine mounting location. Secure swivel brackets and LED strip to inside of canopy with screws provided.
4. Follow connection instructions on next page.
Single TrueLumen PRO
INSTALLATION GUIDE
Attach to canopy
www.current-usa.com