Advertisement
Available languages
Available languages
Installation
Standard rail mounting and removable terminals
(see Figure 2)
Mandatory sequence of expansion modules when
expanding the SIPLUS CMS2000 system:
[Basic Unit VIB] + [VIB-MUX 1/2] + [temperature
module 1/2]
Connecting
● Connect the stripped cable ends to the relevant
connecting terminals and tighten the terminals (see
Figure 2 and Figure 3).
● Connecting system interfaces (front): Connect the
connecting cable between the Basic Unit VIB and VIB-
MUX.
Terminal assignment
Terminal block A
2P24
Power supply for the process
functionality. The process supply and
2M24
logic supply are galvanically isolated
internally.
NC
Not connected
VIB7+
IEPE sensor input 7
NC
Not connected
VIB8+
IEPE sensor input 8
Terminal block B
VIB A+
IEPE output A+ for connection to an
IEPE input on the Basic Unit VIB
(terminal block B VIB1+ or terminal block
A VIB2+)
FE
Functional grounding
VIB A-
IEPE output A- for connection to an
IEPE input on the Basic Unit VIB
(terminal block B VIB1- or terminal block
A VIB2-)
VIB 7-
IEPE sensor input 7
NC
Not connected
VIB8-
IEPE sensor input 8
Terminal block C
VIB1- ... VIB6-
IEPE sensor inputs 1 to 6
Terminal block D
VIB1+ ... VIB6+ IEPE sensor inputs 1 to 6
Technical specifications
Interfaces
Logic power supply (supplied from system interface)
Voltage
Current consumption
Power loss (typical)
Process power supply (supplied from external 24 V
supply)
SIPLUS CMS2000 VIB-MUX 6AT8002-2AA00
A5E31647341/004, 03/2016
5 V DC (±5 %)
< 10 mA
< 50 mW
Interfaces
Voltage
Current consumption
(nominal)
Power consumption
Sensor inputs (IEPE sensors)
Infeed current
(typical)
Input voltage, useful
signal
System interface
Connectable modules •
Maximum
configuration
Ambient conditions
Ambient temperature in
operation
Ambient temperature
during storage and
transport
Relative operating
humidity
Maximum height above
sea level
Degree of protection
General technical specifications
Dimensions (W x H x D)
Weight
Mounting
Approvals
CE, C-Tick
UL
Technical Assistance
Telephone: +49 (0) 911-895-7222 (8°° - 17°° CET)
email (mailto:siplus-cms.industry@siemens.com)
Internet
(Http://www.siemens.com/automation/support-
request)
Additional documentation
The SIPLUS CMS2000 Operating Instructions can also be
found on the Internet
(http://support.automation.siemens.com/WW/view/en/56901
901).
Additional information
Additional information on SIPLUS CMS can be found on the
Internet (http://www.siemens.de/siplus-cms).
24 V DC (±20%)
< 100 mA
< 2.4 W
4 mA
±1 V (2 Vpp)
Temperature module
(3UF7700-1AA00-0)
VIB-MUX (6AT8002-2AA00)
•
Basic Unit VIB + 2 VIB-MUX + 2
temperature modules
-20 °C to +65 °C
-25 °C to +85 °C
< 95% (no condensation)
1500 m
IP20
45 mm x 106 mm x 124 mm
270 g
Mounting onto standard DIN
rail according to EN
60715TH35-15
EMC Directive 2004/108/EEC
UL 508, CSA C22.2 No. 142
3
Advertisement
