Ziton ZP2-ER-C Installation Manual page 11

Fixing the cabinet to a DIN rail
The cabinet can also be installed onto a top hat DIN rail (type EN 50022) using
the mounting hooks and locking clips provided (see Figure 3 on page 5).
To fix the cabinet to a DIN rail:
1. Hang the cabinet onto the rail using the mounting hooks on the back on the
cabinet.
2. Using a screwdriver, push both of the locking clips up to lock the cabinet to
the rail, as shown in Figure 5 below.
Figure 5: Fixing the cabinet to a DIN rail
ZP2 Series Compact Repeater Installation Manual 7