Set Time, Date & Units; Placement Guidelines - ACU-RITE 02446 Instruction Manual

Set the Time, Date & Units
This rain gauge is equipped with historical data and alarms that require accurate
time and date settings to function properly. It is important to set the time, date and
units before using the rain gauge.
Press and release the "SET" button to enter SET MODE. Once in set mode, the
preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the " " or " "
button (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button again to adjust the
next preference. The preference set order is as follows:
CLOCK HOUR (note AM/PM indicators)
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS (INCH or MM)
You will automatically exit SET MODE if no buttons are pressed for 8 seconds. Enter
SET MODE at any time by pressing the "SET" button.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and rain gauge are critical to the accuracy and
performance of this product.
Display Placement
Place the display in a dry area free of dirt and dust.
Display stands upright for tabletop use or is wall-mountable.
Important Placement Guidelines
• Display and rain gauge must be within 100 ft (30 m) of each other.
• To maximize wireless range and communication, install the rain gauge at
least 3 ft (.9 m) above ground. Place both the display and the rain gauge
away from large metallic items, thick walls, metal surfaces, or other objects
that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (0.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.)
TV
AT
LEAST
3
APART
100 feet maximum
(30 meters)
7