Viessmann FT 0700 Assembly And Operation Manual page 6

GB
Place the enclosed neoprene dowels M4 in the 8mm drill holes.
Assemble the evaporation fan unit on the inside plating so that the
exhaust opening is pointing in the right direction.
Screw the evaporation fan unit on with the enclose M4 screws.
Put the air jet in place and screw on tight on both sides with 3
screws each.
Turn the ceiling panel over.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page 6 GB
4
Right reserved to make technical changes!