Transport; Condition At Time Of Delivery; Unpacking And Handling; Energy Savings - Viessmann FT 0700 Assembly And Operation Manual

GB
Do not install the unit in areas where danger of explosion
exists.
Do not install the unit in areas where excessive danger of
fire exists.
According to DIN VDE 0100-482 (VDE 0100 Part 482):
1997-08, these are:
Rooms, or locations in rooms, or outdoors in which the
danger exists that easily flammable materials in dangerous
quantities can be near enough to electrical devices such that
higher temperatures or sparks could produce danger of fire.
These include: workshops, drying rooms, storerooms or parts
of rooms, as well as such areas outdoors: e.g. paper, textiles,
or wood processing plants, hay, straw, jute or flax storage
areas.
- According to BGR 500, chapter 2.35 or local regulations
for operation and maintenance. (qualified staff)
2.4

Transport

Due to the oil in the compressor, the refrigeration unit
may only be transported in the position in which it will be
used later.
2.5

Condition at time of delivery

The refrigeration unit is supplied in three parts.
The units consist of evaporation ventilation unit with the
ceiling cut-out enclosure, insulation housing and the
machine part of the ready-wired refrigeration unit.
Machine part
Ceiling cut-out enclosure
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page 4 GB
Insulation housing
Evaporation ventilation unit
2.6

Unpacking and handling

- Prior to and during unpacking, a visual check should be
made to determine if there has been any damage during
transportation.
- Please note all loose parts, dents, scratches or visible loss
of oil.
- During handling, grip the unit only on the lower part.
- Do not pick up the unit on the evaporation unit!
- Before the packing material is disposed of, check to
ensure that no loose parts are enclosed.
- To properly process claims with regard to the guarantee,
we request exact details of the damage (pictures) as well
as the type designation and serial number of the
machine.
- To protect the unit from damage, it may only be
transported and stored in the position of use. Ensure that
condenser and evaporator are not damaged. Otherwise
the guarantee can be invalidated.
2.7

Energy Savings

Do not install the unit near heat sources; high
temperatures in the surroundings will cause the unit to
operate more often.
Direct sunlight will also increase energy use.
Avoid non-essential opening and closing of doors.
Monitor temperature of storage. Clean the refrigeration
unit regularly. A clean unit saves energy and has a longer
life.
Observe proper intervals between cleanings (See Section
„Cleaning and maintenance of Refrigeration Units").
Regular maintenance increases unit life.
2.3 - 2.7
Right reserved to make technical changes!