12
en | Preparing the Camera
5
Preparing the Camera
Note: For pendant models, use T15.
For in-ceiling models, use T10.
1.
2.
3.
4.
2019-03 | 1.2 |
Loosen the three (3) Hex screws in the trim ring / bubble enclosure with the appropriate
Torx screwdriver.
Remove the trim ring / bubble enclosure.
Remove the foam insert that protects the camera block.
Remove the tape holding the plastic lens protector; remove the lens protector.
T10
1.
3×
5.
2.
3.
4.
Installation Manual
AUTODOME IP starlight 5000i
Bosch Security Systems