Table of Contents
Advertisement
•
[ Multi ]
– for TV that is compatible with
both PAL and NTSC.
•
[ NTSC ]
– for NTSC-system TV.
[ TV Display ]
Select the screen format according to how you
want the picture to appear on the TV.
正常／全景
正常／信箱
•
[ 4:3 Pan Scan ]
– for standard TV, a
full-height screen display with the sides
trimmed.
•
[ 4:3 Letter Box ]
'wide-screen' display with black bars on the
top and bottom.
•
[ 16:9 ]
– for wide-screen TV (frame ratio
16:9).
[ Progressive ]
If a progressive scan TV is not connected
through HDMI cable, turn on progressive scan
mode.
•
[ On ]
– turn on progressive scan mode.
•
[ Off ]
– disable progressive scan mode.
Tip
•
There is more detailed description available. See chapter
'Get Started - Turn on Progressive Scan' for details.
[ Picture Setting ]
Select a predefi ned set of picture color settings
or customize the personal setting.
•
[ Standard ]
– original color setting.
•
[ Bright ]
– vibrant color setting.
•
[ Soft ]
– warm color setting.
•
[ Personal ]
– customize the color setting.
Set the level of brightness, contrast,
sharpness and color saturation, then press
OK.
[ HD JPEG ]
Enjoy untouched and uncompressed JPEG
pictures at it's original resolution when you
connect this DVD video player and the TV with
a HDMI cable.
•
[ On ]
– display high defi nition picture.
•
[ Off ]
– display standard picture.
宽银幕
– for standard TV, a
Note
•
This DVD video player supports the resolution display of
720p and above.
[ HDMI Setup ]
When you connect this DVD player and the TV
with a HDMI cable, select the best HDMI setup
that the TV can support.
•
[ Resolution ]
– select a video resolution
that is compatible with the TV display
capability.
Option
Description
[ Auto ]
It detect and select the
best supported video
resolution automatically.
[480i], [480p],
Select a video resolution
[576i], [576p],
that best supported by the
[720p], [1080i],
TV. See the TVs manual
[1080p]
for details.
Note
•
If the setting is not compatible with the TV, a blank
screen appears. Wait for 15 seconds for auto recover or
switch to its default mode as follows:
1) Press Z to open the disc compartment.
2) Press
numeric button '1'
•
[ Wide Screen Format ]
screen format for disc play.
Option
Description
[Superwide]
Center position of the
screen is stretched less than
the side. This setting is only
applicable if the video
resolution is set to 720p or
1080i/p.
[4:3 Pillar Box] No stretching of the
picture. Black bars are
displayed on both sides of
the screen. This setting is
only applicable if the video
resolution is set to 720p or
1080i/p.
[ Off ]
Picture will be displayed
according to the format of
the disc.
Note
•
This setting is only available if you have set the
Display ]
[ 16:9 ]
setting to
.
– defi ne the wide
[ TV
.
EN
19
Advertisement
Table of Contents
