2
Press
BACK to return to the main menu.
3
Navigate to the photo folder/album and press
OK to start slideshow play.
»
Slideshow begins and continues till the end
of the photo folder or album.
»
Audio continues to play until the end of
the disc.
•
To stop slideshow play, press
•
To stop music play, press
6 Adjust settings
Note
•
If the setup option is grayed out, it means the setting
cannot be changed at the current state.
General setup
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu, press
•
To exit the menu, press
[Disc Lock]
Set play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
•
[Lock] - Restrict access to the current
disc. The next time you want to play this
disc or unlock it, you need to enter the
password.
•
[Unlock] - Play all discs.
12
EN
.
again.
.
SETUP .
Tip
•
You can set or change the password, go to
> [Password] .
[OSD Language]
Select an on-screen menu language.
[Sleep Timer]
Switch automatically to standby at the preset time.
•
[Off] - Disable sleep mode.
•
[15 mins] , [30 mins] , [45 mins] , [60 mins]
-Select the count down time for this
product to switch to standby.
[Auto Standby]
Turn on or off automatically standby.
•
[On] - Switch to standby 15 minutes of
inactivity (for example, in pause or stop
mode).
•
[Off] - Disable the auto standby mode.
Audio setup
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press
to select [Audio Setup] , then press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu, press
•
To exit the menu, press
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
[Stereo] - For stereo output.
•
[LT/RT] - For surround sound output through
two speakers.
[Digital Audio]
Select a digital setting based on the digital ampliÀ er/
receiver that is connected through the digital jack
(coaxial/digital).
•
[Digital Output] - Select a type of digital
output.
[Preferences]
.
SETUP .