Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The player is ready to be set up for use.
4 Get started
Prepare the remote control
1
Open the battery compartment.
2
Insert two R03 or AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove batteries if they are exhausted or if the remote
control is not to be used for a long time.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.
Find the correct viewing channel
1
Press
to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user manual
on how to select the correct channel.)
EN
Select menu display language
1
Press SETUP .
» [General Setup] menu is displayed.
2
Select [OSD Language] , then press .
•
The language options may vary from
different regions.
3
Press
to select a language, then press OK .
Turn on progressive scan
Note
•
To use the progressive scan feature, you must connect
a progressive scan TV with the component video jacks
(see “Connect” > “Connect video cables” > “Option 1:
Connect to the component video jacks” for details).
1
Turn on the TV to the correct viewing channel
for this product.
2
Press SETUP .
3
Press
to select [Video Setup] .
4
Select [Progressive] > [On] , then press OK .
»
A warning message is displayed.
5
To proceed, select [Ok] and press OK .
»
The progressive setup is complete.
Page 8