Table of Contents
Advertisement
•
[Off] - Disable digital output.
•
[All] - Support multi-channel audio
formats.
•
[PCM Only] - Downmix to two-channel
audio format.
•
[LPCM Output] - Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
•
[48kHz] - For discs recorded at sampling
rate of 48 kHz.
•
[96kHz] - For discs recorded at sampling
rate of 96 kHz.
Note
•
[LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only] .
•
The higher the sampling rate, the better the sound
quality.
[Volume]
Set the default volume level when you play a disc.
1. Press OK .
2. Press
to set the volume.
3. Press OK to conÀ rm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
•
[3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
•
[Movie Mode] - Select a sound effect for
movies.
•
[Music Mode] - Select a sound effect for
music.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[On] – Enjoy quiet viewing at night.
•
[Off] – Enjoy surround sound with a full
dynamic range.
Note
•
Applicable only to Dolby Digital encoded DVD.
Video setup
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press
to select [Video Setup] , then press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu, press
•
To exit the menu, press
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
•
[PAL] - For PAL-system TV.
•
[Multi] - For TV that is compatible with both
PAL and NTSC.
•
[NTSC] - For NTSC-system TV.
[TV Display]
Select a display format:
•
[4:3 Pan Scan] - For 4:3 screen TV: full-height
display with the trimmed sides.
•
[4:3 Letter Box] - For 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
•
[16:9] - For wide-screen TV: display ratio 16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
[On] - Turn on progressive scan.
•
[Off] - Turn off progressive scan mode.
Note
•
For more detailed description, see "Get started" >
"Turn on progressive scan".
.
SETUP .
EN
13
Advertisement
Table of Contents
