Table of Contents
Advertisement
Appendix
Mechanism/cassette tapes
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50 ° Celsius. Allow very cold
tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
24
Specifications
Amplifier
Output power:
4 x 6 W RMS power
acc. to DIN 45324/3.1
into 4 Ω
or
4 x 8 W max. power
acc. to DIN 45324/3.2
FM waveband
Sensitivity:
1,3 µV at 26 dB
signal-to-noise ratio
Frequency
response:
35 - 15 000 Hz
Tape player
Frequency
response:
40 - 14 000 Hz
Subject to modifications!
Advertisement
Table of Contents
