Mitsubishi Electric PAR-SL100A-E Operation Manual page 3

1. Safety Precautions
■ Never modify or repair the controller by yourself.
• Any deficiency caused by your modification or repair may result in an electric shock or fire. Consult your dealer
about repairs.
■ Stop operation if the operation lamp on the controller's receiver blinks or if an abnormality occurs.
• Leaving the controller in these conditions can lead to fire or breakdown. Report such conditions to your dealer.
■ Never allow the alkaline batteries to short-circuit. Never disassemble, heat or place them in fire.
• Doing so can cause the strong alkaline liquid to leak and possibly enter your eyes or cause the batteries to explode
or heat up, resulting in personal injuries, burning or mechanical breakdowns. If strong alkaline liquid comes in
contact with your skin or clothes, wash it off with clean water. If it gets in to your eyes, wash them with clean water
and consult a doctor immediately.
■ Do not drop the controller.
• Doing so may cause the case to crack and may disable control.
■ Do not place any dangerous substances near the controller.
• Do not install in any place exposed to leakage of flammable gas. Flammable gases accumulated around the con-
troller may cause fire or an explosion.
■ Do not wash with water.
• Doing so may cause an electric shock or breakdown.
■ Do not touch any control button with wet hands.
• Doing so may cause an electric shock or breakdown.
■ Do not disassemble the controller.
• Contact with internal circuitry may cause fire or breakdown.
■ Do not use in special environments.
• Using in places exposed to oil (including machine oil), steam or sulfur gas can reduce the performance or can
cause damage to the components.
■ Do not spray insecticide or other flammable sprays.
• Do not place flammable sprays near the controller or spray directly at the controller. Doing so may result in fire or
explosion.
■ Do not wipe the controller with benzine, thinner or chemical cloths etc.
• Doing so may cause discoloration or breakdowns. If the controller becomes extremely dirty, dampen a cloth with
water-diluted neutral detergent and wipe the controller with it, then wipe with a dry cloth.
■ Do not press any control button with a sharp object.
• Doing so may cause an electric shock or breakdown.
■ Keep the temperature within the specified range.
• Use the controller within the specified operating temperature range. Using in temperature outside that range can
cause serious breakdowns.
• For the specified operating temperature range, refer to the specifications given on the operation manual.
■ Do not use for other special purposes.
• The controller has been designed for use with the Multi air conditioner and Slim air conditioner only. Do not use for
other purposes such as controlling other air conditioners. Doing so may result in breakdown.
■ Incorrect use of batteries can cause liquid leakage, explosion or heating and may result in breakdown or
personal injury. Adhere to the following.
(1) Do not recharge the batteries.
(2) Insert the batteries in the correct direction.
(3) Do not mix a new battery with an old battery or batteries of different types.
(4) Remove the batteries immediately when they have run out.
WARNING
CAUTION
3