Chapter 6 Maintenance; Disposal; Cleaning And Damage Inspection - Snap-On MODIS User Manual

Chapter 6
This section describes maintenance for the following MODIS™ parts and accessories:

Disposal

•

Cleaning and damage inspection

•
Battery pack
•
• 5-amp fuse
• Fan filter
• CompactFlash
• Liquid Crystal Display (LCD)
6.1 Disposal
Products bearing the WEEE logo (Figure 6-1) are subject to separate collection systems in the
European Union.
IMPORTANT:
Always dispose of materials according to local regulations.
Contact your sales representative for details.
6.2 Cleaning and Damage Inspection
When using the MODIS™ unit, make sure to do the following:
• Before and after each use, check the housing, wiring, and connectors for dirt and damage.
At the end of each working day, clean the housing, wiring, and connectors with a soft, clean
•
cloth and gentle all-purpose cleaner.
IMPORTANT:
Avoid using abrasive or corrosive cleaning products, especially when cleaning the screen. Never
allow liquid to enter the unit as this can cause permanent damage.
Maintenance
®
(CF) cards
Figure 6-1
50
Sample WEEE logo