Advertisement
USER GUIDE
1. Pre-flight steps
a. Charge DRONE battery
b. Phone battery charged
c. Radio battery charged (2 X 18560 – NOT SUPPLIED)
d. Bait release working
e. Skydroid Tower APP installed on phone. (FROM PLAYSTORE)
f. Ensure safe flight location.
i. 50m away from buildings and people.
ii. Do not fly near cell phone towers or high voltage electrical cables
iii. Check wind and weather conditions
iv. Confirm pilot system knowledge.
View Video 1 NOW - Installing the Skydroid Tower APP
Video 2 – How to charge the Drone Battery
2. First Flight (Use this user guide in conjunction with the videos on the Cuta-Copter
YouTube Channel) – SEE THE EX-1 PLAYLIST
a. Insert the charged battery into the battery bay and secure thumb screws.
b. Turn on radio by holding in the middle power button for 3 seconds. The 4 LED
lights will light up and indicate battery level. Consult the radio manual for full
detail.
c. Attach phone to mount and connect the cable to radio and phone.
d. Place the Ex-1 drone on a level surface.
e. Insert the YELLOW bridge switch into the yellow plug at the rear of the drone.
f. Do not move the drone for 5 seconds
g. The yellow light will flash. You can now move your drone to the desired take-
off location.
h. Start the Skydroid APP on the phone. Press "Connect". Data will display on
the phone once a connection is established.
Video 3 – How to do the Compass Calibration. Stick method and
APP method.
3 |
P a g e
Advertisement
