Advertisement
User adjustable Parameter
Always upload the parameter VIA THE PHONE APP after changing it. Do not adjust parameters if you
are not sure of the outcome. Bad things can happen if you change the wrong values.
1. FENCE_RADIUS: This can increase or decrease the distance the drone can fly out
2. BATT_VOLT_MULT: This value must be changed in 0.01 increments if the voltage on the
phone does not match the external battery meter voltage.
3. ARMING_VOLT_MIN: This is the safety level voltage where the drone will not start if the
battery drops below this level.
4. FS_BATT_VOLTAGE: when the battery reaches this level during flight, the drone will initiate
an auto return to launch. If this value is reduced below 3.55V \ cell, then the drone may not have
enough power to make it back to the launch area.
a. *****ALWAYS DROP THE BAIT LOAD IF YOUR DRONE STARTS A RTL****
Make sure to watch the videos on how to change the parameters safely.
Advertisement
