Advertisement
Thank you for purchasing the Cuta-Copter EX-1 fishing drone.
Drones require responsible operators that keep safety as top priority. In order to keep your
drone safe, you will need to maintain it properly.
1. Clean everything regularly
2. Do the accelerometer calibration once per month or when system warns you. View
the video on ACC calibration.
3. Do the voltage meter calibration when the battery voltage is not displaying
accurately.
To set the voltmeter via the phone, use parameter: BATT_VOLT_MULT
If the voltage on your phone is reading low compared to the actual battery voltage, then
increase the BATT_VOLT_MULT value by 0.01 at a time until the Phone reading matches
the reading using a meter on the battery.
If the reading on the phone is high, then decrease the BATT_VOLT_MULT
by 0.01 at a time and check the external meter as above.
Press Upload on the phone APP to save the new values.
View video on: How to adjust parameters on the Cuta-Copter channel.
The EX-1 has new features that include:
1. Waterproofed Canopy seal to protect the main electronics
2. Waterproofed battery bay to seal off battery from water
3. Raised GPS for better reception and reduced interference from electronics
4. HD camera system for reef and fish spotting installed in a waterproof CAMERA POD.
5. ARDUCOPTER BASED FLIGHT CONTROL with data display on device
6. Waterproofed speed control units
7. Waterproof servo bait release unit
8. New Radio control unit with sand, moisture covers on Sticks
9. Air cooled speed control vents to aid ESC cooling.
10. Data display on device to show: Distance, battery power, GPS, speed, Height etc.
11. User adjustable parameters VIA ANDROID phone APP
2 |
P a g e
Advertisement
