Autel AutoLink EBT 210 Manual page 10

3) Select For Pad Change
4) Perform the following procedure
5) If a trouble Code is found, click Y to continue. It will be
cleared in a later step.
6) Continue performing the two Opening Brakes steps.
..... Guided Function
► 1) For Pad Change
2) For Repair
..... Test Condition
► 1) Turn Ignition On
2) Release EPB
3) Shift to P Position
[Y]=Continue [N]=EXIT
..... Open Brakes
Next the brakes will be
completely opened.
[Y]=Continue [N]=EXIT
..... Opening Brakes
Opening Brakes
-Please wait-
.. ...
1/2
9