Vacuum Compartment - Hitachi R-G420KHL Instruction Manual

MAINTENANCE

Vacuum Compartment

Pull out the Vacuum Case.
1
For how to remove,
Be sure to remove foods contained in the Vacuum Case.
2
Wipe off following parts with a soft
cloth which is steeped in lukewarm
water.
※ Do not use the detergents, etc.
Aluminum Tray
Request
● If detergents and others except lukewarm water are used to clean
the vacuum compartment gasket, the vacuum compartment
gasket may be damaged, deformed or change in color, which
may cause the vacuum state unable to keep well.
3
Attach the Vacuum Case.
For how to attach,
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
58
BB0055761Y_R-G420KH_A.indd 58
(CONTINUED)
Once a month
Pg.60
Vacuum Compartment
Vacuum
Gasket seat
Container
Vacuum
compartment
gasket
Pg.60
When the Vacuum Compartment Gasket is dirt
1
Remove the vacuum compartment
gasket from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer ' s upper right and
remove it by hand
carefully.
2
Rinse dirty portion in water using
a soft sponge, etc.
※ Do not use the detergents, etc.
3
Wipe off excess moisture with a
dry cloth and dry it out naturally.
4
Wipe off dirt in the vacuum
compartment gasket
mounting groove.
Groove for attaching the vacuum compartment gasket.
5
Attach the vacuum compartment gasket.
Align the gasket tab of the vacuum compartment with the
notching in the mounting groove and align the hollows in
the gasket between the protrusions (six locations) of the
case to firmly attach.
Tab
Locations of the projections of the case
Tab
Notching of the mounting groove
Projection of the case
Fin
Hollows in the gasket
19/11/08 9:08