Table of Contents
Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
Allen Key
a.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
b.
Dispose of all packaging material immediately after the change table is
assembled.
c.
Identify all parts and components.
d.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the change table is not scratched during assembly.
DO NOT OVER TIGHTEN BOLTS. OVER TIGHTENING BOLTS CAN CAUSE PANELS TO CRACK.
To assemble Change Table...
1a.
Lay one End Panel on its side.
1
1b.
Insert one Top Side Rail into position and secure
with 2 x 38mm Bolts.
1c.
Ensure the grooves on the Top Side Rail are on
the bottom side of the rail and are facing inward.
1d.
Repeat for second Top Side Rail.
Insert one Middle Side Rail into position and
2a.
2
secure with 1 x 38mm Bolt.
2b.
Ensure the grooves on the Middle Side Rail are
facing inward.
2c.
Repeat for second Middle Side Rail.
x 1
WARNING
5
Advertisement
Table of Contents
