Childcare Osmo Beech Instruction Manual page 6

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Change Table continued...
3a.
3
3b.
3c.
4a.
4
4b.
4c.
5a.
5
5b.
6a.
6
7a.
7
The Change Table is now ready for use.
6
Insert one Bottom Side Rail into position and
secure with 1 x 38mm Bolt.
Ensure the grooves on the Bottom Side Rail are
facing inward.
Repeat for second Bottom Side Rail.
Carefully flip the change table onto the
assembled headboard.
Slide Top Shelf into position along the grooves of
the Top Side Rails.
(The Top Shelf is the thickest of the three
shelves).
Slide Middle Shelf into position along the
grooves of the Middle Side Rails.
Slide Bottom Shelf into position along the
grooves of the Bottom Side Rails.
Place the remaining headboard onto the
shelves making sure each shelf sits in the
headboard grooves.
When the headboard is in position, secure with
the remaining 8 x 38mm Bolts.