ASSEMBLY / OPERATING INSTRUCTIONS
a.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
b.
Dispose of all packaging material immediately after the chair and rocker is
assembled.
c.
Identify all parts and components.
d.
Two people are recommended for assembly of the chair.
Spread a sheet on the floor during assembly time to protect the chair.
To assemble Chair Legs...
Lay Chair face down on a flat surface.
1a.
1
2a.
Align Rocking Leg with pre-drilled holes on Chair
2
base. Ensure rocking stoppers are facing rear of
Chair.
2b.
Insert 3 x 53mm Bolts and tighten to secure.
2c.
Repeat for remaining rocking leg.
DO NOT over-tighten bolts.
3a.
Stand chair upright.
3
The rocking chair is now ready for use.
WARNING
5