Pandaboard Es Schematic - pandaboard OMAP4460 ES System Reference Manual

4.4
The following pages contain the PDF schematics for the production Pandaboard ES. The schematics are
included in this document for convenience, and this manual will be periodically updated, but for the latest
information be sure and check on the Pandaboard.org website. OrCAD 16.3 source files are provided for
the Pandaboard ES at the following URL:
http://Pandaboard.org/content/resources/references
These design materials are *NOT SUPPORTED* and DO NOT constitute a reference design. Only
"community" support is allowed via resources at http://Pandaboard.org/content/community/home.
THERE IS NO WARRANTY FOR THE DESIGN MATERIALS, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE DESIGN MATERIALS "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE DESIGN
MATERIALS IS WITH YOU. SHOULD THE DESIGN MATERIALS PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
We mean it; these design materials may be totally unsuitable for any purposes.
Downloaded from Elcodis.com electronic components distributor
OMAP4460 Pandaboard ES
System Reference Manual

Pandaboard ES Schematic

Revision 0.1
September 29, 2011
DOC-21054
Page 67 of 82