4.2.3
The outputs of the TWL6030 VCXIO LDO may be probed around the bottom of the OMAP4460 and
near the oscillator Y3 as shown in Figure 24 below. The possible probe points are at C123-2, C125-2,
R145-1, C109-2, C86-2, C127-2, or C105-2 as shown highlighted in red from left to right in Figure 24.
Downloaded from
Elcodis.com
electronic components distributor
OMAP4460 Pandaboard ES
System Reference Manual
Figure 23 – VDD_CORE1 Output Probe Point
VCXIO LDO Output Probe Point
VDD_VCORE1
Page 64 of 82
Revision 0.1
September 29, 2011
DOC-21054