Omap4460 Pandaboard Es Architecture; Overview Of The Pandaboard Es Architecture - pandaboard OMAP4460 ES System Reference Manual

2 OMAP4460 Pandaboard ES Architecture

This chapter explains the architecture of the OMAP4460 Pandaboard ES.
2.1
Shown in Figure 1 is the Architectural Block Diagram of the OMAP4460 Pandaboard ES.
Listed below are the major components used on the Pandaboard ES.
 OMAP4460 Processor
 TWL6030 (Phoenix) Power Management Companion Device
 TWL6040 (Phoenix) Audio Companion Device
 TPS62361 Switching Power Supply
 POP Mobile LPDDR2 SDRAM Memory
 HDMI Connector (Type A) – for OMAP4460 HDMI Transmitter output
 HDMI Connector (Type A) – for DVI-D output sourced via OMAP4 parallel display output
 Audio Input & Output Connectors (3.5mm)
 SD/SDIO/MMC Media Card Cage
 UART via RS-232 interface via 9-pin D-Sub Connector
 LS Research Module – 802.11b/g/n, Bluetooth
The Platform also includes connectors that can be used for additional functionality and/or expansion
purposes. These connectors are not populated on the platform, but can be installed by the user. They are
indicated by the blue blocks in Figure 1, and include:
 Camera Connector (J17)
 Parallel LCD Expansion Connectors (J1 and J4)
 Generic Expansion Connectors (J3 and J6)
 DSI Display Expansion Connector (J7)
See Figure 2 on page 16 for a top side view of the Panda Platform.
The core components of the Pandaboard ES will be discussed in this section of the document. This would
include the OMAP4460 Processor and its POP LPDDR2 memory, the input clock circuitry, the TWL6030
Power Companion IC, and the TWL6040 Audio Companion IC. The functional interfaces will be
discussed in later sections of the document.
Downloaded from Elcodis.com electronic components distributor
OMAP4460 Pandaboard ES
System Reference Manual

Overview of the Pandaboard ES Architecture

Revision 0.1
September 29, 2011
DOC-21054
Page 14 of 82