LG Multi V Series Installation Manual page 21

4. 2 Remote Control
n Wired remote controller 2 + Indoor unit 1
Master
Display Error Message
°C / °F (5 s) °C / °F (5 s)
TIME (3 s) TIME (3 s)
Master
1. It is possible to connect two wired remote controllers (Max.) with one indoor unit.
Set only one indoor unit to Master, set the others to Slave.
Set only one wired remote controller to Master, set the others to Slave.
2. Every types of indoor unit is possible to connect two remote controller.
3. It is possible to use wireless remote controller at the same time.
4. It is possible to connect with Dry Contact and Central controller at the same time.
5. In case that any error occurs at indoor unit, the error code is displayed on the wired
remote controller.
6. There isnʼt limits of indoor unit function.
5. Accessories for group control setting
It is possible to set group control by using below accessories.
Indoor unit 2 EA +Wired remote controller 1 EA Indoor unit 1 EA +Wired remote controller 2 EA
h PZCWRCG3 cable used for connection
Master
or
Slave
Slave
h PZCWRC2 cable used for connection
Slave
PZCWRCG3
Master
LGAP Network System
Slave
PZCWRC2
Master Slave
Installation Manual 21
Installation
GND
Slave
Signal
12 V