Connection method of the connecting cable
• Open the control box cover and connect the remote controller cables, transmission cables and indoor
power cables.
• Control box cover is consist of two panel which are side and bottom panel.
Control box cover can be separated from main body by 2 method.
Case 1. Separate whole cover(when access from bottom of the product).
Remove screws on the bottom panel and grab the both panel with two hands and pull down
the whole cover.
Case 2. Separate only side panel(when access from side of the product).
Remove screws which are connecting two panel and pull down the side panel.
Side panel
Bottom panel
Installation Manual 11
Installation