Joy-it RB-LCD7.2 Manual
Joy-it RB-LCD7.2 Manual

Joy-it RB-LCD7.2 Manual

7“ display for raspberry pi

Advertisement

3
7" Display
Manual for Raspberry Pi

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RB-LCD7.2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Joy-it RB-LCD7.2

  • Page 1 7“ Display Manual for Raspberry Pi...
  • Page 2: Table Of Contents

    7“ Display for Raspberry Pi TABLE OF CONTENTS Introduction Image-Installation Manual Installation System configuration Display rotation Other informations Support Published: 01.07.2019 Copyright by Joy-IT...
  • Page 3: Introduction

    You can transfer the unpacked system image to your SD card with a suitable program (e.g. Etcher). After successful transmission, the SD card can be inserted into the Raspberry Pi and the system can be started. The display and system are now ready for use. Published: 01.07.2019 Copyright by Joy-IT...
  • Page 4: Manual Installation

    Attention! Please make sure that there are no spaces on either side of the equal sign. Save the file with the key combination CTRL+O, confirm with Enter and exit with the combination CTRL+X. After rebooting the system, the display is ready for use. Published: 01.07.2019 Copyright by Joy-IT...
  • Page 5: Display Rotation

    CTRL+X. After changing the display orientation, an additional adjustment of the touch parameters is required. Open the file 99-calibration.conf with the following command: sudo nano /etc/X11/xorg.conf.d/99-calibration.conf Add the necessary values according to your settings. Published: 01.07.2019 Copyright by Joy-IT...
  • Page 6 MatchProduct “ADS7846 Touchscreen“ Option “Calibration“ “3998261 1403951“ Option “SwapAxes“ “1“ EndSection Save your changes with the key combination CTRL+O, confirm with Enter and exit the editor with the combination CTRL+X. Reboot your system after saving. Published: 01.07.2019 Copyright by Joy-IT...
  • Page 7: Other Informations

    Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by e-mail at Service@joy-it.net or by phone. Information about packaging: If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.
  • Page 8: Support

    E-Mail: service@joy-it.net Ticket-System: http://support.joy-it.net Phone: +49 (0)2845 98469 – 66 (11- 18 o‘clock) Please visit our website for more informations: www.joy-it.net Published: 01.07.2019 Copyright by Joy-IT...

Table of Contents