Advertisement
2. Electric Specification
2-1. Input Voltage/Current/Frequency:
2-2. Motor
Motor
DN3435-3046E
PR545AG-12300-
IG32-721
Warning:
1. Incorrect installation may result in fall off of TV and this bracket and personal injuries.
2. Ceiling mounting of this bracket is out of the responsibility of manufacturer shall be carried out
by competent persons, or licensed person, with using the attached anchors (Ø10-M8x70) only
to ensure the safety.
3. Use this bracket properly, please read the instructions carefully before installation. Keep this
guide well for further reference.
4. The user must pay attention to the weight of TV and This product, and only solid wall (the
wall must be make up of concrete or brick) can support the weight . Please complied with the
installation instruction of LCD/PDP to install them.
5. Do not attach the TV on the bracket before installations.
3. Installation Instruction
3-1.
Firstly,please make sure the wall thickness for TV wall mount is at least 80mm and the
osition where you want to install the TV do not have any rigid materials(such as : reinforcing steel
bar , steel block ,etc) and any loose phenomena. Make the mark at the place of ceiling that you
ant to mount the TV. Use percussion borer to drill 9 holes on the mark, at Φ10mm and 75 depth
.Take out 9 pcs (6) expansion screws from the fitting bag, insert them through the holes of cart into
the hole of ceiling by hammer and fasten them by wrench. (See diagram 1)
100-240VAC, 1.2A,50/60Hz
Output Current: DC24V ,3A
Rated
Current
Voltage
(No load)
DC24V
≤ 0.5 A
DC24V
≤ 0.3 A
USER'S GUIDE
Current
(Rated load)
Temperature
≤ 2 A
-20 C ~ -50 C
≤ 0.5 A
-20 C ~ -50 C
Page 2
Operation
Advertisement
