Dser RoboGeek 21T User Manual page 13

6.
Start Cleaning Cycle
Press the power button once to wake up the robot.
Press the power button again to start a cleaning cycle (or
button on Remote Control).
If its battery gets low before finishing a cleaning cycle, robot
returns to the Charging Dock to recharge.
If the Charging Dock is inaccessible, Robot will not be able to
recharge, please place the robot manually on Charging Dock for
charging. (Refer Activate the Robot)
Please refer to section 3.3 for more Cleaning Mode.
7.
Pause
To pause the robot during a cleaning cycle press the
on robot or press the
To resume the cleaning cycle, press
To send robot back to the Charging Dock, press
the Remote Control.
The actions listed above can also be managed from the
Remote Control.
8.
Power OFF
To end the cleaning cycle and put robot in standby mode, press
and hold button until robot's indicators turn off.
11
button
button on the Remote Control.
button again.
button on