Siemens SIPROTEC 4 7XT7100-0 A00/EE Series Product Information page 2

NOTE
For your own safety, please observe the warnings and safety instructions con-
tained in this document.
NOTE
This Product Information contains important information about the
Injection Unit 7XT71.
It is part of the product supplied, and the information in it should be considered
more up-to-date than any other information if uncertainties arise.
Disclaimer of Liability
This document has been subjected to rigorous tech-
nical review before being published. It is revised at
regular intervals, and any modifications and amend-
ments are included in the subsequent issues. The
content of this document has been compiled for infor-
mation purposes only. Although Siemens AG has
made best efforts to keep the document as precise
and up-to-date as possible, Siemens AG shall not
assume any liability for defects and damage which
result through use of the information contained
herein.
This content does not form part of a contract or of
business relations; nor does it change these. All obli-
gations of Siemens AG are stated in the relevant con-
tractual agreements.
Siemens AG reserves the right to revise this docu-
ment from time to time.
Document release: C53000-B1174-C128-7.00
Edition: 09.2016
Product version: /EE
Copyright
Copyright Siemens AG 2016. All rights reserved.
The disclosure, duplication, distribution and editing of
this document, or utilization and communication of the
content are not permitted, unless authorized in writ-
ing. All rights, including rights created by patent grant
or registration of a utility model or a design, are
reserved.
Registered Trademarks
®
SIMATIC , SIMATIC NET
® ®
SICAM , SIMEAS , SINAUT
®
DAKON are registered trademarks of
SIEMENS AG. An unauthorized use is illegal.
All other designations in this document can be trade-
marks whose use by third parties for their own pur-
poses can infringe the rights of the owner.
® ®
, SIPROTEC , DIGSI
® ®
, OSCOP , and
®
,