Towing The Machine - Toro Greensmaster TriFlex 3400 Series Operator's Manual

and damage or wear to hydraulic and mechanical
components. The cutting units should be checked
for sharpness. Also, lubricate the traction pedal and
brake shaft assembly with SAE 30W oil or spray
lubricant to deter corrosion and help keep the machine
performing satisfactorily during the next mowing
operation.

Towing the Machine

In case of an emergency the machine can be towed
for a short distance (less than 0.4 km (1/4 mile)).
However, Toro does not recommend this as standard
procedure.
Important:
Do not tow the machine faster than
3-5 km/h (2-3 mph) because the drive system may
be damaged. If the machine must be moved a
considerable distance, transport it on a truck or
trailer.
1. Locate the bypass valve on the pump and rotate
it so that the slot is vertical
1. Bypass valve—slot shown in closed (horizontal) position
2. Before starting the engine, close the bypass
valve by rotating it so that the slot is horizontal
(Figure 40). Do not start the engine when the
valve is open.
(Figure 40).
Figure 40
g014627
33