Flatness Of The Supporting Surfaces For Conventional Motors; Machine Frame Mounting Feet (Special Design) - Siemens SIMOTICS DP 1PC13 Operating Instructions Manual

5.5.1

Flatness of the supporting surfaces for conventional motors

5.5.2

Machine frame mounting feet (special design)

Note
For terminal boxes mounted at the NDE (option H08), dimension C can deviate from EN
50347.
For motors with double or triple holes at the NDE, maintain the foot mounting dimensions as
specified in standard EN 50347 .
Smoke extraction motors
Operating Instructions, 03/2016, 5 610 80000 40 018
Frame size
≤ 132
160
≥ 180
Assembly
5.5 Alignment and fastening
Flatness
[mm]
0.10
0.15
0.20
47