Assign Volume Control To Another Mode - Philips SRU7060/10 User Manual

4
Press the SELECT key twice to confirm
– The mode light will blink twice to confirm the
selected mode is reset to default settings.
• If the mode light blinks once for a longer time,
the reset failed.Try again from step 1.

Assign Volume control to another mode

The volume controls (Volume up,Volume down and Mute) on the SRU 7060
are assigned to either your TV or your amplifier/receiver, depending on the
device you have selected;
MODE
TV mode selected ............................Volume controls work with TV
VCR mode selected.........................Volume controls work with amplifier/ receiver
DVD mode selected .......................Volume controls work with amplifier/ receiver
STB mode selected ..........................Volume controls work with TV
Receiver mode selected................Volume controls work with amplifier/ receiver
CD mode selected...........................Volume controls work with amplifier/ receiver
If you want a different setup, the volume control assignment can be changed.
Example: In VCR mode you want to operate the TV volume control
1
Select the VCR mode with the SELECT key.
2
Press keys 1 and 6 simultaneously for
5 seconds until the label of the selected mode
blinks twice and remains lit.
3
Press keys 9, 9 and 3, in that order.
4
Select the TV mode with the SELECT key.
5
Press key 1.
– The mode light will blink twice to confirm that
the VCR volume controls are assigned to TV.
• If the mode light blinks once for a longer time,
the volume assignment failed.Try again from
step 1.
VOLUME CONTROLS
Instructions for use
2 x
11