Table of Contents
Advertisement
SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 10
Instructions for use
Assigning the volume control to another mode
The volume controls (Vol +,Vol - and s) on the SRU740 are assigned to
either your TV or your amplifier/receiver, depending on the device you have
selected:
MODE
TV mode selected ............................Volume controls work with TV
DVD (VCR) mode selected........Volume controls work with TV
SAT mode selected..........................Volume controls work with TV
AMP mode selected........................Volume controls work with amplifier/ receiver
If you want a different setup, the volume control assignment can be changed.
Example: In SAT mode you want to operate the amplifier/receiver volume
control
1
Press the SELECT key to select SAT.
Press the key until the SAT LED lights up.
2
Then keep keys 1 and 6 on the SRU740
pressed simultaneously for three seconds,
until the SAT LED flashes twice and then
remains lit.
3
Press keys 9, 9 and 3 in that order.
4
Press the SELECT key to select SAT.
Press the key until the SAT LED lights up in
the selector window.
Restoring the original functions of your remote
control
1
Keep keys 1 and 6 on the SRU740
pressed simultaneously for three seconds,
until one of the LEDs (TV, SAT, DVD/VCR,
AMP) lights up.
2
Press keys 9, 8 and 1, in that order.
–
The LED flashes twice. All original functions
have now been restored and any extra
functions have been deleted.
10
VOLUME CONTROLS
Advertisement
Table of Contents
